Cylindrical shape PZF

Tungsten carbide profile cylinder burr PZF dia. 06x22x60 mm shank dia. 6 mm for locksmiths, police and fire service

PZF 0622/6-60

Item number:: 26007674
EAN:: 4007220414569

Technical data Change variant

Retailers-Search

Choose options

Dia. external

4 mm 6 mm

Length, total

60 mm 70 mm 80 mm

Reset Filter

Technical information

Tungsten carbide profile cylinder burr PZF dia. 06x22x60 mm shank dia. 6 mm for locksmiths, police and fire service

Cut: MICRO
Dia. external: 6 mm
Dia. shank: 6 mm
Length, cut: 22 mm
Length, total: 60 mm
Packaging unit: 1 piece

Description

The profile cylinder burr PZF for locksmiths from PFERD is a cylindrical burr with drill tip and cut cutting surfaces, which was developed specially for time-saving milling of locked profile cylinders with pull protection. The integrated drill tip enables accurate centring, meaning that the profile cylinder can be milled precisely. Thanks to the cut on the external surface and the twisted grooves, optimum chip removal is ensured. Tool jamming is therefore minimized and the risk of breakage is reduced. Furthermore, the innovative milling tool from PFERD impresses with its good tool life, despite the challenging application.

Using conventional burrs takes several minutes to open a profile cylinder of a security lock. Thanks to its extremely high stock removal rate, PFERD’s innovative solution usually enables you to complete this task in under one minute – depending on the lock.

Cylindrical burr with drill tip and cut cutting surfaces.

Advantages

Enormous time savings thanks to very high stock removal rate.
High-precision drilling thanks to centring point.
Less susceptible to breakage, as tool jamming is minimized.
Optimum chip removal.
Easy to use.
Good tool life.

Recommendations for use

Use the burrs on powerful straight grinders that are, insofar as possible, speed-adjustable.
The optimum rotational speed and power output for the tool drive are required for cost-effective use of the burr. Recommended rotational speed range: 14,000–28,000 RPM.
Use the strike plate burr SBF from PFERD in order to remove facings or security covers in front of the profile cylinder.

Materials that can be worked: Brass; Bronze; Cast iron; Cast steel; Copper; Other non-ferrous metals; Soft non-ferrous metal; Stainless steel (INOX); Steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels

Applications: Drilling; Milling; Milling out

Drive types: Straight grinder

PFERDVALUE

PFERDEFFICIENCY

recommends profile cylinder burrs for cost-effective working with perfect results as quickly as possible.

Downloads

Cylindrical shape PZF

Tungsten carbide profile cylinder burr PZF dia. 06x22x60 mm shank dia. 6 mm for locksmiths, police and fire service

PZF 0622/6-60

PFERDEFFICIENCY

PFERD Newsletter subscription