POLICLEAN discs PCLS

POLICLEAN PLUS PCLS non-woven cleaning fabric dia. 75x13 mm hole dia. 6 mm for coarse cleaning work

Item number:: 44692076
EAN:: 4007220069257

POLICLEAN PLUS PCLS non-woven cleaning fabric dia. 75x13 mm hole dia. 6 mm for coarse cleaning work 2

Technical data Change variant

Retailers-Search

Choose options

Dia. external

75 mm 100 mm 150 mm

Dia. hole

6 mm 13 mm

Version

PCLS PCLS PLUS

Reset Filter

Technical information

POLICLEAN PLUS PCLS non-woven cleaning fabric dia. 75x13 mm hole dia. 6 mm for coarse cleaning work

Abrasive: Aluminium oxide A
Dia. external: 75 mm
Dia. hole: 6 mm
Max. RPM: 10000 RPM
RPM, optimum, from: 4000 RPM
RPM, optimum, to: 5100 RPM
Version: PCLS PLUS
Width: 13 mm
Packaging unit: 6 pieces

Description

For coarse cleaning work, e.g. removing paint, scale, heat discolouration, rust and adhesive residues in peripheral grinding.

POLICLEAN is a coarsely structured, abrasive, non-woven cleaning fabric that was developed from a special combination of synthetic fibres and abrasive grain.

Advantages

High flexibility and open structure mean optimal adjustment to contours and no clogging of the tool itself.
The PLUS version (blue) has a considerably higher stock removal rate and a very good tool life, and is very aggressive.

Recommendations for use

For the best results, use at a recommended cutting speed of 15-20 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
For work on larger surfaces, pack several POLICLEAN discs with the appropriate arbor.

Ordering notes

Please order compatible arbor separately.

Safety notes

For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Aluminium; Annealed cast iron; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Cleaning; Roughening; Surface work

Drive types: Drive spindle; Flexible shaft drive; Straight grinder

Downloads

POLICLEAN discs PCLS

POLICLEAN PLUS PCLS non-woven cleaning fabric dia. 75x13 mm hole dia. 6 mm for coarse cleaning work

PFERD Newsletter subscription