POLINOX discs PNL

POLINOX non-woven fibre-backing disc PNL dia. 125 mm centre hole dia. 22.23 mm A280 for fine grinding and finishing

Item number:: 44692263
EAN:: 4007220104309

POLINOX non-woven fibre-backing disc PNL dia. 125 mm centre hole dia. 22.23 mm A280 for fine grinding and finishing 2

POLINOX non-woven fibre-backing disc PNL dia. 125 mm centre hole dia. 22.23 mm A280 for fine grinding and finishing 3

POLINOX non-woven fibre-backing disc PNL dia. 125 mm centre hole dia. 22.23 mm A280 for fine grinding and finishing Youtube

Technical data Change variant

Retailers-Search

Choose options

Dia. external

115 mm 125 mm

Grit size

100 180 280

Packaging unit

1 5

Reset Filter

Matching accessories & spare parts

Masking tape ADB 20

Technical information

POLINOX non-woven fibre-backing disc PNL dia. 125 mm centre hole dia. 22.23 mm A280 for fine grinding and finishing

Abrasive: Aluminium oxide A
Dia. external: 125 mm
Dia. hole: 22.23 mm
Grit size: 280
Max. RPM: 3800 RPM
RPM, optimum: 2300 RPM
Width: 20 mm
Packaging unit: 1 piece

Description

POLINOX grinding discs consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive flaps are stuck to a glass-fabric backing pad, meaning that the discs can be used face-down. A long tool life is achieved through the dense packing of the flaps.

The tool is designed for working on large surfaces with speed-adjustable angle grinders.

Advantages

Highly flexible, enabling optimal adjustment to the contour.
Cool grinding and low thermal load on the workpiece.
The open structure and high flexibility of the non-woven material prevents tool clogging.

Recommendations for use

For the best results, use at a recommended cutting speed of 10-20 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.

Safety notes

The maximum permitted peripheral speed is 32 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Cleaning; Deburring; Roughening; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work

Drive types: Angle grinder; Cordless angle grinder

PFERDVALUE

PFERDERGONOMICS

recommends POLINOX grinding discs to sustainably reduce the vibration and noise produced during use and to improve comfort when working.

Downloads

POLINOX discs PNL

POLINOX non-woven fibre-backing disc PNL dia. 125 mm centre hole dia. 22.23 mm A280 for fine grinding and finishing

Matching accessories & spare parts

PFERDERGONOMICS

PFERD Newsletter subscription