Tungsten carbide burr set for high performance, cut ALLROUND HC-FEP

Tungsten carbide high-performance burr set 1414 ALLROUND HC-FEP 3-piece shank dia. 6 mm universal coarse

Item number:: 21901415
EAN:: 4007220226711

Tungsten carbide high-performance burr set 1414 ALLROUND HC-FEP 3-piece shank dia. 6 mm universal coarse 2

Tungsten carbide high-performance burr set 1414 ALLROUND HC-FEP 3-piece shank dia. 6 mm universal coarse 3

Tungsten carbide high-performance burr set 1414 ALLROUND HC-FEP 3-piece shank dia. 6 mm universal coarse 4

Technical data

Retailers-Search

This set contains

Tungsten carbide high-performance burr ALLROUND cylindrical ZYAS end dia. 12x25mm shank dia. 6mm HICOAT steel

Item number: 21001044

EAN: 4007220221860
Tungsten carbide high-performance burr ALLROUND cylindrical with radius end WRC dia. 12x25mm shank dia. 6mm HICOAT universal

Item number: 21001048

EAN: 4007220221945
Tungsten carbide high-performance burr ALLROUND tree shape with radius end RBF dia. 12x25mm shank dia. 6mm HICOAT universal

Item number: 21001056

EAN: 4007220222065

Technical information

Tungsten carbide high-performance burr set 1414 ALLROUND HC-FEP 3-piece shank dia. 6 mm universal coarse

Cut: ALLROUND HC-FEP
Dia. shank: 6 mm
PFERD type: 1414 ALLROUND HC-FEP
Packaging unit: 1 piece

Description

The 1414 ALLROUND HC-FEP set contains three versatile tungsten carbide burrs with high-quality HICOAT coating for use on important materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron in the most common shapes and dimensions. The sturdy plastic box protects the tools from dirt and damage.

Advantages

High hardness and wear resistance.
Effective chip removal through improved anti-adhesion characteristics.
Very high resistance against thermal load.
Increased tool life.
Also suitable for use at higher cutting speeds when compared with uncoated burrs.
The highly accurate concentricity enables impactfree working without creating chatter marks and the drive is subject to less wear.

Recommendations for use

To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.

Safety notes

The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Materials that can be worked: Case-hardened steels; Cast steel; Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the HICOAT coating for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.