Tungsten carbide burr set for high performance, cut MICRO

Tungsten carbide small high-performance burr set 1303 MICRO 3-piece dia. 3 mm shank dia. 3 mm finishing

Item number:: 21901303
EAN:: 4007220226667

Tungsten carbide small high-performance burr set 1303 MICRO 3-piece dia. 3 mm shank dia. 3 mm finishing 2

Tungsten carbide small high-performance burr set 1303 MICRO 3-piece dia. 3 mm shank dia. 3 mm finishing 3

Tungsten carbide small high-performance burr set 1303 MICRO 3-piece dia. 3 mm shank dia. 3 mm finishing 4

Tungsten carbide small high-performance burr set 1303 MICRO 3-piece dia. 3 mm shank dia. 3 mm finishing Youtube

Technical data Change variant

Retailers-Search

This set contains

Tungsten carbide high-performance burr MICRO cylindrical ZYA dia. 03x13 mm shank dia. 3 mm finishing

Item number: 21201273

EAN: 4007220895535
Tungsten carbide high-performance burr MICRO cylindrical with radius end WRC dia. 03x13 mm shank dia. 3 mm finishing

Item number: 21205173

EAN: 4007220869000
Tungsten carbide high-performance burr MICRO tree shape with radius end RBF dia. 03x13 mm shank dia. 3 mm finishing

Item number: 21218173

EAN: 4007220955352

Technical information

Tungsten carbide small high-performance burr set 1303 MICRO 3-piece dia. 3 mm shank dia. 3 mm finishing

Cut: MICRO
Dia. shank: 3 mm
PFERD type: 1303 MICRO
Packaging unit: 1 piece

Description

Tungsten carbide burrs with the MICRO cut are specifically designed for finishing and are used in areas in which mounted grinding points are used for example. They offer a higher stock removal rate and produce a high surface quality, particularly compared with conventionally milled surfaces. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined.

The 1303 MICRO set contains three tungsten carbide burrs for finishing work in the most common shapes and dimensions. The sturdy plastic box protects the tools from dirt and damage.

Advantages

High surface quality.
Unlike with mounted grinding points, there is no change in geometry due to wear and tear.
Use on almost all materials up to 68 HRC.
The highly accurate concentricity enables impactfree working without creating chatter marks and the drive is subject to less wear.

Recommendations for use

Particularly well suited to finishing, for very fine cleaning work, corrections in tool and mould construction or for sharpening cutting tools.
To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the MICRO cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.

PFERDERGONOMICS

recommends burrs with the MICRO cut as an innovative tool solution for comfort when working, with significantly reduced vibration and less noise.

Downloads

Tungsten carbide burr set for high performance, cut MICRO

Tungsten carbide small high-performance burr set 1303 MICRO 3-piece dia. 3 mm shank dia. 3 mm finishing

This set contains

PFERDEFFICIENCY

PFERDERGONOMICS

PFERD Newsletter subscription