Tungsten carbide burr set NEW COMBI CUT, MX NCC

Tungsten carbide burr set NCC 4-piece dia. 12 mm and 10 mm shank dia. 6.35 mm MX all materials

Item number:: 26006823
EAN:: 4007220024973

Tungsten carbide burr set NCC 4-piece dia. 12 mm and 10 mm shank dia. 6.35 mm MX all materials 2

Tungsten carbide burr set NCC 4-piece dia. 12 mm and 10 mm shank dia. 6.35 mm MX all materials 3

Technical data Change variant

Retailers-Search

Technical information

Tungsten carbide burr set NCC 4-piece dia. 12 mm and 10 mm shank dia. 6.35 mm MX all materials

Cut: MX NCC
Dia. shank: 6 mm
PFERD type: 6/4-12/10 MX NCC
Packaging unit: 1 piece

Description

NEW PFERD-COMBICUT tungsten carbide burrs with the cut MX NCC were designed especially for general use. They have a good stock removal rate when used on various different materials.

The set contains the four most common shapes in the general cut MX NCC. The robust round plastic box with screw-on top protects the tools against dirt and damage.

Advantages

Good stock removal rate and tool life.
Cost-effective stock removal when used on a wide variety of materials.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Use the highest rotational speeds possible. In this respect, please observe our recommended rotational speeds/cutting speeds.
The contact area between the burr and the workpiece must not exceed 30 % of the total burr surface.

Materials that can be worked: Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Hardwood; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Other; Other non-ferrous metals; Plastics; Stainless steel (INOX); Steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Thermoplastics; Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Wood

Applications: Cutting out holes; Deburring; Milling; Working on edges; Work on weld seams

Drive types: Flexible shaft drive; Robot; Straight grinder

Downloads

Tungsten carbide burr set NEW COMBI CUT, MX NCC

Tungsten carbide burr set NCC 4-piece dia. 12 mm and 10 mm shank dia. 6.35 mm MX all materials

PFERD Newsletter subscription