Tungsten carbide burr set NEW COMBI CUT, MX NCC

Tungsten carbide burr set NCC 6/5-12 5-piece dia. 12 mm shank dia. 6 mm MX all materials

Item number:
21900501
EAN:
4007220935699

Login / Register
Choose options
PFERD type
Technical information
Tungsten carbide burr set NCC 6/5-12 5-piece dia. 12 mm shank dia. 6 mm MX all materials

Cut
MX NCC
Dia. shank
6 mm
PFERD type
6/5-12 MX NCC
Packaging unit
1 piece
Description

NEW PFERD-COMBICUT tungsten carbide burrs with the cut MX NCC were designed especially for general use. They have a good stock removal rate when used on various different materials.

The 6/5-12 MX NCC set contains the five most common shapes with a burr diameter of 12 mm in the general MX NCC cut. The robust round plastic box with screw-on top protects the tools against dirt and damage.

Advantages
  • Good stock removal rate and tool life.
  • Cost-effective stock removal when used on a wide variety of materials.
  • The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Recommendations for use
  • Use the highest rotational speeds possible. In this respect, please observe our recommended rotational speeds/cutting speeds.
  • The contact area between the burr and the workpiece must not exceed 30 % of the total burr surface.
Materials that can be worked
Bronze
Case-hardened steels
Cast iron
Cast steel
Cobalt-based alloys
Fibre-reinforced thermosetting plastics (GRP, CRP)
Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %
Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Hard aluminium alloys
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Hard non-ferrous metal
Hardwood
High-temperature-resistant materials
Nickel-based alloys (e.g. Inconell and Hastelloy)
Other
Other non-ferrous metals
Plastics
Stainless steel (INOX)
Steel
Steel, cast steel
Steel materials with a hardness > 54 HRC
Steels over 700 N/mm² (> 220 HB)
Steels up to 1,200 N/mm² (< 38 HRC)
Steels up to 700 N/mm² (< 220 HB)
Thermoplastics
Titanium
Titanium alloys
Tool steels
White annealed cast iron (GTW, GJMW)
Wood
Applications
Cutting out holes
Deburring
Milling
Working on edges
Work on weld seams
Drive types
Flexible shaft drive
Robot
Straight grinder
Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.