Tungsten carbide burrs for general use, cut 1, oval shape TRE

Tungsten carbide burr oval TRE dia. 12x20 mm shank dia. 6 mm Z1 universal coarse

Item number:: 21135116
EAN:: 4007220048955

Technical data

Retailers-Search

Technical information

Tungsten carbide burr oval TRE dia. 12x20 mm shank dia. 6 mm Z1 universal coarse

Cut: 1
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 20 mm
Length, total: 2,362
Length, total: 60 mm
RPM from, grey cast iron, white cast iron: 16000 RPM
RPM from, rust and acid-resistant steels: 7000 RPM
RPM from, soft non-ferrous metals: 16000 RPM
RPM from, steels up to 1,200 N/mm²: 16000 RPM
RPM to, grey cast iron, white cast iron: 24000 RPM
RPM to, rust and acid-resistant steels: 12000 RPM
RPM to, soft non-ferrous metals: 24000 RPM
RPM to, steels up to 1,200 N/mm²: 24000 RPM
Radius corner design: 5 mm
Packaging unit: 1 piece

Description

Cut 1 is especially well-suited to machining of non-ferrous metals, steel and cast iron. It is characterized by its high stock removal rate.

Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Oval burr according to DIN 8032 with cut conforming to DIN 8033.

Advantages

Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
Long tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
High surface quality.

Recommendations for use

To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Case-hardened steels; Cast iron; Cast steel; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Soft aluminium alloys; Soft non-ferrous metal; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels; White annealed cast iron (GTW, GJMW); Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Tungsten carbide burrs for general use, cut 1, oval shape TRE

Tungsten carbide burr oval TRE dia. 12x20 mm shank dia. 6 mm Z1 universal coarse

PFERD Newsletter subscription