Tungsten carbide burrs for general use, cut 3, oval shape TRE

Tungsten carbide burr oval TRE dia. 12x20 mm shank dia. 6 mm Z3 universal medium

TRE 1220/6 Z3

Item number:: 21135106
EAN:: 4007220048931

Tungsten carbide burr oval TRE dia. 12x20 mm shank dia. 6 mm Z3 universal medium 1

Technical data

Retailers-Search

Matching accessories & spare parts

Handpieces for RCK system RCK GS 4/100

Technical information

Tungsten carbide burr oval TRE dia. 12x20 mm shank dia. 6 mm Z3 universal medium

Cut: 3
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 20 mm
Length, total: 60 mm
Radius corner design: 5 mm
Packaging unit: 1 piece

Description

Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.

Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Oval burr according to DIN 8032 with cut conforming to DIN 8033.

Advantages

Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
Long tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
High surface quality.

Recommendations for use

To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Soft non-ferrous metal; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Zinc