Tungsten carbide burrs for high performance, PLAST, cylindrical shape ZYA without end cut

Tungsten carbide high-performance burr PLAST ZBS cylindrical ZYA dia. 06x25mm shank dia. 6mm for plastics

ZYA 0625/6 PLAST ZBS

Item number:: 21456696
EAN:: 4007220900451

Tungsten carbide high-performance burr PLAST ZBS cylindrical ZYA dia. 06x25mm shank dia. 6mm for plastics 1

Tungsten carbide high-performance burr PLAST ZBS cylindrical ZYA dia. 06x25mm shank dia. 6mm for plastics 2

Tungsten carbide high-performance burr PLAST ZBS cylindrical ZYA dia. 06x25mm shank dia. 6mm for plastics 3

Tungsten carbide high-performance burr PLAST ZBS cylindrical ZYA dia. 06x25mm shank dia. 6mm for plastics 4

Tungsten carbide high-performance burr PLAST ZBS cylindrical ZYA dia. 06x25mm shank dia. 6mm for plastics Youtube

Technical data

Retailers-Search

Matching accessories & spare parts

Handpieces for RCK system RCK GS 4/400

Technical information

Tungsten carbide high-performance burr PLAST ZBS cylindrical ZYA dia. 06x25mm shank dia. 6mm for plastics

Cut: PLAST
Dia. external: 6 mm
Dia. point: 2.5 mm
Dia. shank: 6 mm
Length, cut: 25 mm
Length, total: 65 mm
Version: ZBS
Packaging unit: 1 piece

Description

Tungsten carbide burrs with the PLAST cut are suitable for trimming and contour milling on a wide range of fibre-reinforced plastics (GRP/CRP). They are particularly suitable for use on less hard glass and carbon-fibre-reinforced duroplastics (GRP and CRP ≤ 40 % fibre content) and fibre-reinforced thermoplastics. The PLAST cut (similar to PCD milling) minimizes delamination and fraying.

Cylindrical burr with centre drill.

Burrs with a centre drill (ZBS) allow combined drilling and milling work.

Advantages

Particularly suitable for GRP and CRP ≤ 40 % fibre content.
Minimized delamination and fraying due to the special cut that is similar to PCD mills.
Particularly suitable for use on machines and on robots.
Very low cutting force.
High feed rates.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Select a burr diameter greater than the thickness of the material to be machined, to avoid impacts and chattering with the risk of damaging or breaking the tool.
Increase the rotational speed if the tool tends to chatter.
If necessary, reduce the rotational speed and contact pressure if melting occurs.
To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.
Burrs with a centre drill (ZBS) are particularly ideal for manual application. They allow secure drilling on almost all surface conditions.

Materials that can be worked: Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Plastics; Thermoplastics

Applications: Cutting out holes; Deburring; Drilling; Leveling; Milling; Milling out; Surface work; Trimming

Drive types: Automated centres; Flexible shaft drive; Straight grinder; Tool machine

PFERD TOOLS VALUE

PFERD TOOLS EFFICIENCY

recommends burrs with the PLAST cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.