Tungsten carbide burrs for high performance, TITANIUM, cylindrical shape ZYAS with end cut

Tungsten carbide burr cylindrical ZYAS end cut 06x16mm shank dia. 6mm TITANIUM for titanium

Item number:
21100284
EAN:
4007220034248
Technical information
Tungsten carbide burr cylindrical ZYAS end cut 06x16mm shank dia. 6mm TITANIUM for titanium

Cut
TITANIUM
Dia. external
6 mm
Dia. shank
6 mm
Length, cut
16 mm
Length, total
2,165
Length, total
55 mm
RPM from, hard non-ferrous metals
13000 RPM
RPM to, hard non-ferrous metals
24000 RPM
Packaging unit
1 piece
Description

The TITANIUM cut has been especially developed for work on hard titanium materials (tensile strength > 500 N/mm²). It is characterized by an extremely high stock removal rate on this material group, which has very challenging stock removal properties. Tungsten carbide burrs with the TITANIUM cut impress with their smooth milling with considerably reduced vibration and less noise.

Cylindrical burr according to DIN 8032 with circumferential and end cut.

Advantages
  • Excellent stock removal rate and tool life due to innovative tooth geometry.
  • Tangibly more aggressive, large chips and very good chip removal.
  • Comfortable working with reduced vibration and less noise.
  • The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Recommendations for use
  • Determine the rotational speed in each case depending on the titanium alloy you need to machine.
  • Reduce the rotational speed if excessive flying sparks occur. Depending on the titanium alloy you are machining, flying sparks may not be entirely avoidable.
  • To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
  • Observe the recommended rotational speeds.
  • To ensure cost­effective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.
Safety notes
  • The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.
Materials that can be worked
Hard non-ferrous metal
Titanium
Titanium alloys
Applications
Cutting out holes
Deburring
Leveling
Milling
Milling out
Surface work
Work on weld seams
Drive types
Drive spindle
Flexible shaft drive
Robot
Stationary machines
Straight grinder
Tool machine
PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the TITANIUM cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.
product.aggregation.prv-eff
product.aggregation.prv-eff
product.aggregation.prv-eff
product.aggregation.prv-eff

PFERDERGONOMICS

recommends burrs with the TITANIUM cut as an innovative tool solution for comfort when working, with significantly reduced vibration and less noise.
product.aggregation.prv-ergo
product.aggregation.prv-ergo
product.aggregation.prv-ergo

Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.