Tungsten carbide burrs for high performance, TOUGH, ball shape KUD

Tungsten carbide high-performance burr TOUGH ball KUD dia. 12x10 mm shank dia. 6 mm impact-resistant

KUD 1210/6 TOUGH

Item number:: 21000056
EAN:: 4007220770160

Tungsten carbide high-performance burr TOUGH ball KUD dia. 12x10 mm shank dia. 6 mm impact-resistant 1

Tungsten carbide high-performance burr TOUGH ball KUD dia. 12x10 mm shank dia. 6 mm impact-resistant 2

Tungsten carbide high-performance burr TOUGH ball KUD dia. 12x10 mm shank dia. 6 mm impact-resistant Youtube

Technical data Change variant

Retailers-Search

Choose options

Cut

TOUGH

Dia. external

8 mm 12 mm

Dia. shank

6 mm

Length, cut

7 mm 10 mm

Length, total

47 mm 51 mm

Reset Filter

Matching accessories & spare parts

Handpieces for RCK system RCK GS 4/100

Technical information

Tungsten carbide high-performance burr TOUGH ball KUD dia. 12x10 mm shank dia. 6 mm impact-resistant

Cut: TOUGH
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 10 mm
Length, total: 51 mm
RPM, grey cast iron, white cast iron: 7.000 - 16.000 RPM
RPM, hardened, heat-treated steels over 1,200 N/mm²: 7.000 - 9.000 RPM
RPM, steels up to 1,200 N/mm²: 7.000 - 16.000 RPM
Packaging unit: 1 piece

Description

The TOUGH cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH cut are particularly aggressive and are characterized by high stock removal.

Ball-shaped burr according to DIN 8032.

Advantages

The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Minimized tooth chipping/breakage, splintering and burr failures due to very robust, high-performance cuts.
Can also be used in low rotational speed ranges.
Due to their extreme impact resistance, they are ideal for use as long-shank variants.

Recommendations for use

Observe the recommended rotational speeds.
The TOUGH cut can be used on materials up to 54 HRC. For harder materials, it is recommended to perform trials beforehand.
Tungsten carbide burrs with the TOUGH cut are also suitable for applications involving impact when using shank extensions, for applications with a high surface contact angle, for milling narrow contours, or for applications where high rotational speeds are not available.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Case-hardened steels; Cast iron; Cast steel; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels; White annealed cast iron (GTW, GJMW)