Wheel brushes, knotted, universal, shank-mounted

POS wheel brush knotted RBG dia. 76x12 mm shank dia. 6.35 mm steel wire dia. 0.50 universal

POS RBG 7612/6,35 ST 0,50 Universal

Item number:: 43740085
EAN:: 4007220399507

POS wheel brush knotted RBG dia. 76x12 mm shank dia. 6.35 mm steel wire dia. 0.50 universal 1

POS wheel brush knotted RBG dia. 76x12 mm shank dia. 6.35 mm steel wire dia. 0.50 universal 2

POS wheel brush knotted RBG dia. 76x12 mm shank dia. 6.35 mm steel wire dia. 0.50 universal 3

POS wheel brush knotted RBG dia. 76x12 mm shank dia. 6.35 mm steel wire dia. 0.50 universal 4

Technical data

Retailers-Search

Technical information

POS wheel brush knotted RBG dia. 76x12 mm shank dia. 6.35 mm steel wire dia. 0.50 universal

Dia. external: 76 mm
Dia. filament material: 0.5 mm
Dia. shank: 6.35 mm
Filament material: Steel wire (ST)
Length, filament: 18 mm
Mounting system: Shank
Packaging: POS packaging
RPM, max.: 25000 RPM
Width: 12 mm
Packaging unit: 5 pieces

Description

Aggressive brush for cleaning, derusting and work on weld seams.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire withstands temperatures up to 300 Â°C.

Advantages

Aggressive brushing effect due to the very stiff wire knots.
Optimal access to hard-to-reach areas such as grooves and recesses.
Optimum presentation on the PFERDTOOL-CENTER using hanging hole and labelling with EAN number, designation and filament material.
Long tool life through use of PFERD special wire.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 500 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing oxide layers; Root seam processing; Work on fillet welds; Work on weld seams

Drive types: Flexible shaft drive; Power drill; Straight grinder

Downloads

Wheel brushes, knotted, universal, shank-mounted

POS wheel brush knotted RBG dia. 76x12 mm shank dia. 6.35 mm steel wire dia. 0.50 universal

POS RBG 7612/6,35 ST 0,50 Universal

PFERD Newsletter subscription